Huawei ECC800-Pro User Manual page 148

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
3.
4.
Issue 02 (2020-09-07)
Figure 6-4 Set Authentication Mode
NO TE
– If the access actuator version is V139 or later, the access actuator supports the
authentication mode by card, password, or fingerprint.
To query the access actuator version, choose Maintenance > Version Information.
View the version in the Device Version list.
– If you set the authorization mode to Combination, for example, card, password
and fingerprint, you need to first swipe your card, enter the password, press the
pound key (#), and then enter the fingerprint. The door can be opened only after
verification of all the three items is successful.
– If you set the authorization mode to Card, Password or Fingerprint, when you use
the password to enable the access control, enter the password in the format of
user ID*password#. If you enter an incorrect password or user ID, press * on the
keyboard of the access controller to stop the authentication process. Then, enter
user ID*password#.
To query the user ID, log in to the ECC800-Pro WebUI as an administrator. Choose
System Settings > Access Management. In the Authorization area, view the user
ID corresponding to the user name.
Select the configured access actuator and click OK to complete setting the
authorization mode.
On the Authorization Operations tab page, click Add to access the new user
page. On the Basic Info tab page, enter User name and Employee ID.
Specify the following information on the Password tab.
– Password: Enter and confirm the password.
– Card number: The card number can be recorded directly or by swiping the
card.
▪
Record directly: Type the access card number in the text box.
▪
Record by swiping the card: Click Swipe Card and place the card on
the access control device. The card number is automatically recorded.
– Fingerprint: On the Fingerprint tab page, select Fingerprint for Select
fingerprint reader and click Scan Fingerprint. On the Please collect
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
137