How Can I Open Doors Remotely Over The Ecc800-Pro Webui - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Path
NOTE
Monitoring >
System > UIM
Group > UIM1 >
Running
Parameters, click
Unhide All
Advanced
Signals, click
Power Supply
Parameters.
Step 3 After setting all mandatory parameters, click Submit.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800-Pro WebUI, and drag the dry contact
device to the corresponding position in the Smart Module View pane based on
the actual device layout.
8.1.33 How Can I Open Doors Remotely over the ECC800-Pro
WebUI?
Context
If O&M personnel need to enter a smart module but do not take an access cord or
forget the password, you can open the door remotely over the ECC800-Pro WebUI.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Open the aisle door.
Issue 02 (2020-09-07)
Parameter
AI/DI_3
The setting
sensor type
example indicates
that the device
connects to the
AI/DI_3 port on
the UIM1. If the
device connects to
another port,
enter the number
of the connected
port.
II power
supply
enable(COM
3/AIDI_3/
COM4/
AIDI_4)
Copyright © Huawei Technologies Co., Ltd.
Setting
Select the type of the device to be accessed
from the drop-down list box.
The default value is Enable.
8 FAQ
337