How Can I Install A Device Access Certificate; How Can I Change The Ecc800 Ip Address On The Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

9.1.2 How Can I Install a Device Access Certificate?

Context




Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Device Access Certificate.
Step 3 Click Browse on the right of Upload CA certificate file.
Step 4 Select the certificate to be imported from the PC and click Upload.
Step 5 Click Browse on the right of Upload local certificate file.
Step 6 Select the certificate to be imported from the PC and click Upload.
Step 7 Click Browse on the right of Upload key file.
Step 8 Select the key file to be imported from the PC and click Upload.
Step 9 Specify Key cryptography and Confirm key cryptography.
Step 10 Click Submit.
----End

9.1.3 How Can I Change the ECC800 IP Address on the WebUI?

Context
You have obtained the IP address, subnet mask, and default gateway information planned for
the ECC800.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Monitor Module IP and change the IP, subnet mask, and default
gateway information for the ECC800 as planned.
Step 3 Click Submit.
Issue 06 (2020-01-02)
You have obtained a device access certificate and the certificate key and have copied the
certificate and key file to the PC.
A preset certificate is provided for the ECC800 and its connected devices. If a higher
security level is required, replace the certificate both on the ECC800 and the devices.
You need to apply for a device access certificate from an organization authorized by the
customer, and replace the original certificate on the devices and ECC800.
This section describes how to import a certificate to the ECC800. For details about how
to import a certificate to devices, see the operation manual of the devices.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
185