Huawei ECC800 User Manual page 83

ECC800 Data Center Controller
User Manual
Indicator
Alarm
Networking Switch
Table 3-68 Networking switch description
Name
Button pressing
Button holding
down
Issue 06 (2020-01-02)
Color
Red
 If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
Definition
Press the button for less
than 5 seconds.
Hold down the button
for more than 5
seconds.
Copyright © Huawei Technologies Co., Ltd.
Silk Status
Screen
intervals
Blinking at
long intervals
ALM Off
Steady on
Blinking at
super short
intervals
Function
Searches for and joins a network if there is no
network. Initializes the network parameters if
there is a network.
Clears the current network and resets the
wireless module; disconnect the network.
3 Device Description
Description
The networking succeeds.
The BIM is not faulty.
 The BIM is faulty.
 Communication with the CIM
times out.
 No network is connected. (The
BIM is waiting to connect to a
network.)
 Network parameters are being
cleared.
 The BIM is blinking.
74