Huawei ECC800 User Manual page 50

ECC800 Data Center Controller
User Manual
Item
E-label
Indicators
Table 3-30 Description of the indicators on the multi-functional sensor
Indicator
RUN
ALM
RF_Z
Issue 06 (2020-01-02)
Specifications
Supported
Color Name
Green Module running
status indicator
Red Alarm indicator
Green Communication
status indicator
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Status Description
Blinking at The multi-functional
long intervals
sensor successfully
registers with the
ECC800 and the
software runs properly
(the indicator blinks at
0.5 Hz, on for 1s and
then off for 1s).
Blinking at The multi-functional
short intervals sensor fails to register
with the ECC800 or the
communication fails
(the indicator blinks at 4
Hz, on for 0.125s and
then off for 0.125s).
Blinking The indicator blinks at
super short intervals for
0.5s (blinking at 10 Hz,
on for 0.05s and then
off for 0.05s) and then
turns off for 0.5s. The
cycle lasts for 10s.
Steady on A system failure alarm
or smoke alarm is
generated.
Off No system alarm is
generated.
Steady on No network parameters
exist, or a network is to
be created.
Blinking at A network is set up, and
long intervals
no node access is
allowed (the indicator
blinks at 0.5 Hz, on for
1s and then off for 1s).
Blinking at A network is set up, and
super short node access is allowed
41