Configuring The Vcn500 - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual



5.11.1 Configuring the VCN500

Prerequisites
For details about the VCN500 hardware description and installation, see the "Quick Start" in
the VCN500 V100R002C20 Product Documentation. For details about the VCN500
configuration, see the "Configuration Guide". For more details, see the document delivered
with the device or click
Context
A default IP address has been configured for the VCN500 before delivery. Modify the IP
address based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN500.
1.
2.
3.
Issue 06 (2020-01-02)
To ensure the normal operating of the ECC800, avoid high data traffic, such as the
concurrent display of dynamic monitoring of cameras and VCN500 video playback.
To ensure the normal operating of the ECC800, you can view the videos from a maximum
of two IPC6325-WD-VR cameras concurrently.
here
The version number is subject to the Quick Start delivered with the VCN500. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN500 IP address in the same network segment.
Enter the OMU Portal address (https://192.168.1.100:8443 by default) in the address bar
of the Internet Explorer and press Enter button.
On the login page, enter the user name Admin and preset password Change_Me, and
click Log In to enter the OMU Portal page. A message is displayed upon the first login
indicating that you should modify the password. After modifying the password, keep it
properly.
Choose Local Configuration > Server configuration, and set the service IP address
(VCN500 IP address) and NAT IP address according to the site requirements.
Figure 5-20 Configuring the server
Copyright © Huawei Technologies Co., Ltd.
to download the document.
5 Power-On Commissioning
137