Huawei ECC800-Pro User Manual page 135

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Table 5-14 Setting a device address
Address
1
2
3
4
5
6
7
8
9
10
11
12
Step 4 Add the cabinet electronic clasp locks.
1.
2.
3.
4.
Issue 02 (2020-09-07)
Toggle Toggle
Switch 1 Switch 2
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
Log in to the ECC800-Pro WebUI as an administrator.
Create a cabinet view in Smart Module View on the home page.
Add a cabinet electronic clasp lock.
Table 5-15 Adding an E-LOCK
Path
Choose System Settings
> Device Management
and click Add Device.
The parameters for
adding devices are
displayed.
Click Test Connect to check whether the connection between the cabinet
electronic clasp lock and the ECC800-Pro is normal.
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
Copyright © Huawei Technologies Co., Ltd.
Toggle Toggle
Switch 3 Switch 4
OFF OFF
OFF OFF
OFF OFF
ON OFF
ON OFF
ON OFF
ON OFF
OFF ON
OFF ON
OFF ON
OFF ON
ON ON
Parameter Setting
Device Elock
attribute
Device Type E-LOCK
Connect To ECC800
Communicat odd-numbered cabinets: COM2
ions Port
even-numbered cabinets: COM3
Device Enter the actual device address of
Address the cabinet electronic clasp lock.
5 Power-On Commissioning
Toggle Toggle
Switch 5 Switch 6
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
124