Huawei ECC800-Pro User Manual page 78

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Figure 3-34 ETH converter
(1) Status indicator
(4) COM2 communications port
Specifications
Table 3-60 ETH converter technical specifications
Item
Power
input
RS485/CA
N
BLINK
button
E-label
Issue 02 (2020-09-07)
(2) BLINK button
(5) 48 V power port
Specifications
● DC input: terminal, with an input voltage of 36 V DC–60 V DC
● PoE power supply: one PoE port, 10/100M communication rate,
complying with IEEE802.3at
Provides two RS485/CAN ports. The default communications rate
for the RS485 port is 9600 bit/s, and that for the CAN port is 125
kbit/s. Both ports match the RJ45 terminal shared by RS485 and
CAN.
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super short
intervals for 0.5s and then off for 0.5s) for 10 seconds.
Supported
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
(3) COM1 communications port
(6) PoE port
67