How Can I Add The Devices Accessed Through A Smart Eth Gateway To The Ecc800-Pro Webui (Modbus-Tcp) - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Procedure
Step 1 Configure the free-rule MAC address using the free-rule configuration method so
that users can access the network without authentication. For details, see section
"authentication free-rule" in the
----End
8.1.26 How Can I Add the Devices Accessed Through a Smart
ETH Gateway to the ECC800-Pro WebUI (Modbus-TCP)?
Prerequisites
The device supports DHCP.
Context
Figure 8-29 Network diagram
Procedure
Step 1 Ensure that the device communication mode has been set to DHCP.
Step 2 Log in to the ECC800-Pro WebUI as an administrator, and check whether the
device exists on the Monitoring page.
●
Issue 02 (2020-09-07)
If the device exists, and communication status is normal, the device has
accessed the ECC800-Pro successfully.
Copyright © Huawei Technologies Co., Ltd.
S12700 V200R008C00 Product Documentation .
8 FAQ
327