Huawei ECC800-Pro User Manual page 283

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
2.
Issue 02 (2020-09-07)
Add an Envicool air conditioner.
Table 8-8 Adding an Envicool CRU
Path Parameter
Choose Device
System Attribute
Settings >
Device Type
Device
Management
and click Add
Connect To
Device.
Communicati
ons Port
Device
Address
Table 8-9 Adding an Envicool IFX Termina device
Path Parameter
Choose Device
System Attribute
Settings >
Device Type
Device
Management
and click Add
Connect To
Device.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Air Conditioner from the drop-
down list box.
Select ENVICOOL-CRU from the drop-
down list box.
Select ECC800 from the drop-down list
box.
NOTE
If the other end of the straight-through cable is
connected to the COM port on the UIM20A,
select UIM.
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the Envicool
CRU is connected to the COM1 port on the
ECC800-Pro. If the Envicool CRU is connected to
another port, enter the number of the
connected port.
In this example, Device Address is set to 1.
During actual configuration, set the device
address for the air conditioner based on
the actual situation.
Setting
Select Air Conditioner from the drop-
down list box.
Select Envicool-IFX Terminal from the
drop-down list.
Select ECC800 from the drop-down list
box.
NOTE
If the other end of the straight-through cable is
connected to the COM port on the UIM20A,
select UIM.
8 FAQ
272