Facial Recognition; Recording Facial Data - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Check Method
information about the
T/H sensor on the
WebUI.
Set T/H sensor alarm
thresholds.
----End

6.13 Facial Recognition

6.13.1 Recording Facial Data

Prerequisites
The FusionModule app has been installed on the pad.
Procedure
1.
2.
3.
Issue 06 (2020-04-22)
You have logged in to the FusionModule app on the pad as an administrator.
On the main screen of the app, click
Account Management. After reading the message, click OK.
Click Add to start recording facial data.
The facial data is used only for configuring the facial recognition function and is not used for other
purposes. The facial data is encrypted during transmission in the ECC800-Pro to ensure that the personal
data of users is fully protected.
Copyright © Huawei Technologies Co., Ltd.
Normal Connection Status
n > Running Info, and check the current T/H and NTC
information of the cabinet.
Choose Monitoring > Cabinet > IT Cabinet n > T/H Sensor
n > Running Parameters, and set High temperature alarm
threshold, Low temperature alarm threshold, High
humidity alarm threshold, and Low humidity alarm
threshold as required.
NOTE
The default values of High temperature alarm threshold, Low
temperature alarm threshold, High humidity alarm threshold, and
Low humidity alarm threshold are 30.0° C, 5.0° C, 85.0% RH, and
15.0% RH, respectively.
. On the displayed Edit page, select Face
6 Feature Description
198