What Do I Do If The Ecc800-Pro Webui Display Language Changes From Chinese To English During Use; What Do I Do If The Ecc800-Pro Fails To Communicate With The Ups5000-E; What Should I Do If I Forget The Ecc800 Ip Address - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
If communication between the ECC800-Pro and the device is interrupted during parameter
synchronization, the synchronization fails. Ensure that the ECC800-Pro and the device
communicate properly and synchronize parameters again.
----End
8.1.20 What Do I Do If the ECC800-Pro WebUI Display Language
Changes from Chinese to English During Use?
Context
Cause: The browser cookies are deleted.
Procedure
Step 1 Manually refresh the browser page.
----End
8.1.21 What Do I Do If the ECC800-Pro Fails to Communicate with
the UPS5000-E?
Procedure
Step 1 Tap System Info on the LCD after the UPS is started.
Step 2 Choose System Info > Settings, enter the user name and password, and tap
Step 3 Choose Settings > Advanced and set Modbus TCP encryption to Disable.
----End

8.1.22 What Should I Do if I Forget the ECC800 IP Address?

Procedure
Step 1 If the ECC800 has been connected to the NMS, you can query the IP address on the NMS.
Issue 06 (2020-04-22)
The source device can be a device that communicates properly or fails to communicate, but the target
device must be a device that communicates properly.
The preset user name is admin and the preset password is 000001.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
.
277