Huawei ECC800 User Manual page 150

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Figure 6-15 IP camera ONVIF interface access password
Step 4 Click Confirm after video information is entered.
Step 5 In the Video information list, click a link address under Link to go to the camera WebUI as
instructed.
Step 6 For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
1.
2.
3.
Set coding protocol to H.265.
Issue 06 (2020-04-22)
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
(Optional) If the VCN is not configured, configure an SD card. For details, see
Commissioning IPC6325 Camera (SD Card
Choose Settings > Video/Audio/Image > Video Settings, and set camera stream type,
primary stream, and secondary stream 1 parameters.
Copyright © Huawei Technologies Co., Ltd.
Configured).
6 Feature Description
6.5.3.2
139