Setting Alarm Notification By Email And Sms - Huawei ECC800 User Manual

Data center controller
Hide thumbs Also See for ECC800:
Table of Contents

Advertisement

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 4 After configuring the parameters, click Finish.
Step 5 After confirming that the commissioning Result is normal, enter the Checker Name and
Check Date, and click Configuration Completed.
----End

5.4 Setting Alarm Notification by Email and SMS

You can set alarm notification by email or SMS as required. Information about a maximum of
20 users who will receive alarm notification can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:
Procedure
Step 1 Choose System Settings > Event Notification.
Step 2 Set related outbox parameters.
1.
Issue 06 (2020-04-22)
In the process, click Previous, Next, and Skip as required.
To exit before the configuration is complete, click Finish to terminate the configuration directly.
To export the configuration result, click Export Check Result. The export file format is csv.
The ECC800-Pro is configured with a 4G module and supports 2G/3G/4G SIM card
access.
1. The ECC800-Pro supports only SMS notification service but not data service by using the 4G
module.
2. China: 2G and 4G networks support China Unicom or China Mobile SIM cards, and 3G networks
support only China Unicom SIM cards.
3. Outside China: SIM cards are selected based on the following wireless standards and frequency
bands:
4G: wireless mode (FDD-LTE and TDD-LTE), coverage frequency band (B1, B3, B5, B7, B8, and
B20)
3G: wireless mode (WCDMA), coverage frequency bands (B38, B40, and B41)
2G: wireless mode (GSM), coverage frequency band (900/1800 MHz)
The ECC800-Pro is connected to a network with an email server through a WAN port.
Both the Internet and local area network (LAN) are supported.
Set related parameters in the Outbox Settings area on the Mailbox Settings page. If the
address type of the outbox is Domain name, choose System Settings > System
Parameters, and set related parameters in the DNS Server Address area on the
Monitor IP page.
The DNS server address is provided by the local network operator.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
98

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecc800-pro

Table of Contents