Link Smoke Alarm With Cabinet Electronic Clasp Lock Open - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
4.
----End

6.6.2.2 Link Smoke Alarm with Cabinet Electronic Clasp Lock Open

Context
In this example, the smoke sensor connects to port AI/DI_1. The actual port prevails.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose System Settings > Linkage Control.
Step 3 Ensure that Enable linkage control function is Yes.
Step 4 On the Linkage Group tab page, set Link smoke alarm with Cabinet Electronic Clasp
lock open to on.
Step 5 Modify the AI/DI_1 signal name.
1.
2.
3.
Step 6 Enable the AI/DI device.
1.
2.
3.
4.
----End
Follow-up Procedure
After the smoke alarm is cleared, you need to manually close the door. After the door is closed,
the door open alarm is cleared.
Issue 06 (2020-04-22)
Click Unhide All Advanced Signals, then click Power Supply Parameters. Ensure that
I power supply enable(AIDI_2/COM1/AIDI_4/COM3) is Enable.
Select Link smoke alarm with Cabinet Electronic Clasp lock open under Linkage Group. If its
value is on, the corresponding logic configurations under Linkage Logic List are available. If its value
is off, the corresponding logic configurations under Linkage Logic List are unavailable.
Choose System Settings > Signal Name Modify. The Batch Signal Configuration
page is displayed.
Set Device type to ECC800, set Device name to ECC800, and click OK.
On the query result tab page, set the new signal name of AI/DI_1 to Smoke and click
Submit.
Choose Monitoring > System > ECC800 > Running Parameters > AI/DI_1 Port
Settings.
Set AI/DI_1 sensor to Enable. Click Submit to access the AI/DI_1 setting page.
Confirm that Smoke sensor type is automatically identified as Smoke sensor or Smoke
sensor(NC).
Click Unhide All Advanced Signals, then click Power Supply Parameters. Ensure that
III power supply enable(AIDI_1/DO) is Enable.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
168