Setting Parameters On The Vcn Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)

6.5.5 Setting Parameters on the VCN WebUI

Prerequisites
For details about the VCN hardware description and installation, see the "Hardware Guide" in
the corresponding VCN product documentation. For details about the VCN configuration, see
Configuration Guide.
Context
A default IP address has been configured for the VCN before delivery. Modify the IP address
based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN.
1.
2.
3.
Issue 06 (2020-04-22)
The version number is subject to the Quick Start delivered with the VCN. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN IP address in the same network segment.
Enter the OMU Portal address (the default address for VCN500 is
https://192.168.1.100:8443; the default address for VCN510&VCN520&VCN540 is
https://192.168.2.101:8443) in the address bar of the Internet Explorer and press the
Enter button.
The OMU Portal supports Internet Explorer 8.0 and later versions.
On the login page, enter the user name admin and preset password Change_Me, and
click Log In to enter the OMU Portal page. A message is displayed upon the first login
indicating that you should modify the password. After modifying the password, keep it
properly.
 If the VCN software version is V100R003 or later, the default user name is admin.
 If the VCN software version is V100R002 or earlier, the default user name is Admin.

The following uses V100R003 as an example.
Choose Local Configuration > Server configuration. Set the service IP address
(internal IP address of the VCN), time zone, and time according to the site requirements.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
151