Replacing An Ecc800-Pro Main Control Module - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
2.
3.
4.

7.3.1 Replacing an ECC800-Pro Main Control Module

Prerequisites




Procedure
Step 1 Use the Back Up Current Settings function to record the ECC800-Pro configuration
information or manually record the information.
Path: Maintenance > Configuration File > Back Up Current Settings
Step 2 Label each cable and antenna based on the corresponding ports on the ECC800-Pro main
control module.
Step 3 Remove cables, USB flash drive, USB-to-WiFi module, and antennas from the ECC800-Pro
main control module.
Step 4 Loosen the screws on both sides of the ECC800-Pro main control module and pull the handles
on both sides of the ECC800-Pro main control module to remove the main control module.
Issue 06 (2020-04-22)
Click Device type and select the component type from the drop-down list.
Select the failure device in Source Device, select the reserved device in Target Device,
and click Submit to synchronize the configuration parameters of the failure device to the
reserved device.
On the Monitoring > System > ECC800 > Controls tab page, select Delete device with
communication failure and click Submit, add the reserved device to the smart module
view.
The ECC800-Pro main control module is hot-swappable.
Before disconnecting cables from the ECC800-Pro main control module, label the cables
based on the corresponding ports.
Tools: ESD wrist strap, ESD gloves, Phillips screwdriver, labels, marker
Materials: a new undamaged and undeformed ECC800-Pro main control module of the
appropriate model
If the main control module is damaged, you may fail to log in to the ECC800-Pro. In this case, you
cannot back up the settings.
The following information cannot be backed up: monitoring module IP address parameters, smart
module certificate, NetEco certificate, NetEco second-challenge password, time configuration
parameters, access user management, access permission management, device access certificate, log, and
user configuration information.
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
214