Huawei ECC800 User Manual page 217

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 9 In this example, a Polymer temperature and humidity (T/H) sensor is added in the equipment
room of the root node. Select the device to be added and drag its icon to the management
domain.
Step 10 Set management attributes.
Figure 6-64 Page for setting management attributes
Step 11 Click
Step 12 Choose System > Configuration > Transmission Channel Management.
Step 13 Click Modify after selecting the IP address of the ECC800-Pro connected to the NMS.


Issue 06 (2020-04-22)
IP Address indicates the ECC800-Pro login IP address. Port indicates the ECC800-Pro COM2 port
(3212). Device Address indicates the Polymer T/H sensor address.
to save the created device view.
If Connection mode is set to Compatible, click Confirm.
On the ECC800-Pro WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm password
that has been set on the ECC800-Pro WebUI, and click Confirm.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
206