Creating An Ecc800-Pro On The Neteco - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Path
Table 6-48 Setting the authentication password
Path
System
Settings >
NMS
Application >
NetEco > Set
Authenticatio
n Password
Step 5 Click Submit.
----End

6.14.1.3 Creating an ECC800-Pro on the NetEco

Prerequisites


Context
For detailed operations, see iManager NetEco 6000 Device Installation and Commissioning
Guide of the corresponding version.
Procedure
1.
2.
3.
Issue 06 (2020-04-22)
Parameter
link setup
Parameter
Authentication
password
Confirm
authentication
password
You have logged in to the NetEco client by web browser.
You have created modules in Data Center Planning.
Choose System> Configuration > Data Center Planning from the main menu. The
Data Center Planning window is displayed.
Click in the upper left area of the Data Center Planning window.
Click Access switch to the Add Device window. You can add an ECC800-Pro device to
the specified modular in the Add Device window.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
Default
Setting
Value
Modifyme_ Set this parameter based on customer
123 requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,
./?-`$'(8-32 characters that
include at least three of the
following types: lowercase
letters, uppercase letters,
digits, and special characters)
- -
6 Feature Description
203