How Should I Add Devices Accessed Through The Ecc800-Pro Com Port To The Ecc800-Pro Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
8.1.28 How Should I Add Devices Accessed Through the
ECC800-Pro COM Port to the ECC800-Pro WebUI
Prerequisites
This section uses the device connecting to the COM1 port on the ECC800-Pro as an example.
Context
Figure 8-33 Network diagram
Procedure
Step 1 Set communications parameters on the device.
Table 8-41 Description of communications parameters to be set on a device
Parameter
Baud rate
Communications address
Step 2 Add the device to the ECC800-Pro WebUI.
1.
2.
Table 8-42 Parameter description for adding a device
Path
Issue 06 (2020-04-22)
Log in to the ECC800-Pro WebUI as an administrator.
Add the device.
Parameter
Copyright © Huawei Technologies Co., Ltd.
Recommended Value
This section uses 9600 as an example. Set this parameter
based on site requirements.
NOTE
For certain devices, this parameter does not need to be set.
This section uses 1 as an example. Set this parameter based on
site requirements.
Setting
8 FAQ
285