How To Set And Add A Netcol5000-A025 Parameters (Over Mac-Modbus) - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
After the smart cooling product is shut down, the temperature of the smart module increases
and data running is affected. Exercise caution when performing this operation.
----End
8.1.6.14 How to Set and Add a NetCol5000-A025 Parameters (over
MAC-Modbus)?
Prerequisites
One end of the straight-through cable has been connected to the FE port on the
NetCol5000-A025 main control board, and the other end has been connected to the POE port
on the ETH converter.
Procedure
Step 1 Set NetCol5000-A025 monitoring parameters.
1.
2.
3.
Step 2 Set the running parameters and control parameters for the 25 kW smart cooling product on the
ECC800-Pro WebUI.
1.
2.
3.
4.
After the smart cooling product is shut down, the temperature of the smart module increases
and data running is affected. Exercise caution when performing this operation.
Issue 06 (2020-04-22)
Enter the NetCol5000-A025 home page, click Settings, choose the user name admin,
and enter password 000001. After login, the settings screen of the NetCol5000-A025 is
displayed.
Choose Comm Settings > IP Settings, set IP assigning mode to Automatic (DHCP),
and click Submit.
Choose Settings > Comm Settings > Modbus Settings, and set Connection mode to
Server and client, Server encryption to Enable.
After the NetCol5000-A025 parameters are set, the ECC800-Pro can automatically identify the
automatic access of the NetCol5000-A025.
Log in to the ECC800-Pro WebUI as an administrator.
Choose Monitoring > Cooling > NetCol5000-A0251.
 1 in NetCol5000-A0251 is variable and subject to change with the smart cooling product model and
connection sequence. The displayed value prevails.
On the Running Parameters tab page, set running parameters.
On the Controls tab page, set the smart cooling product control parameters (such as
on/off control parameters).
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
244