Smart Eth Gateway - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Indicators
Table 3-24
Table 3-24 Indicator description
Indicator
PWR
RUN
ALM

3.2.3 Smart ETH Gateway

A smart ETH gateway allows the extension of the 53.5 V DC power supply and FE
communication for the ECC800-Pro and can be flexibly deployed in a smart module.
Figure 3-9 Smart ETH gateway
(1) PWR_IN
Issue 06 (2020-04-22)
lists the structural specifications for the rack environment unit.
Color Name
Green Power input
status
indicator
Green Module
running
status
indicator
Red Alarm
indicator
(2) FE_1 cascading
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power is abnormal or the board
program is loading.
Blinking at The software runs properly (the
long intervals indicator blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at POE communication fails (the
short indicator blinks at 4 Hz, on for
intervals 0.125s and then off for 0.125s).
Blinking The indicator blinks at super short
intervals for 0.5s (blinking at 10 Hz,
on for 0.05s and then off for 0.05s)
and then turns off for 0.5s. The
cycle lasts for 10s.
Steady on A system failure alarm is generated.
Off No system alarm is generated.
(3) POE_1–2
3 Device Description
(4) POE_3–4 ports
29