Huawei ECC800 User Manual page 104

ECC800 Data Center Controller
User Manual (for ECC800-Pro)

In ECC800 V100R002C10 and earlier versions, the default IP address of port WAN_1 is
192.168.1.10.

The WAN1 port IP address cannot be set to an IP address in any of the following network
segments: 192.168.0.x, 192.168.245.x, 192.168.246.x and 192.168.248.x.

IP addresses for the WAN1 and WAN2 ports should not be set in the same network
segment.

In some customized scenarios, the default IP address for the WAN_2 port is
192.168.248.10. The default value prevails.

WAN ports support the Internet access and LAN ports support the intranet access. Connect
the PC network port to the WAN port or LAN port on the ECC800-Pro based on the access
network.
Step 2 Configure the PC IP address and the WAN1 IP address in the same network segment.
If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and default
gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask to 255.255.255.0,
and default gateway to 192.168.8.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Step 4 Set Internet Explorer parameters.
1.
2.
Issue 06 (2020-04-22)
 If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform
Step 3.4.
 If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet over a proxy
server, do not perform
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) On Proxy server, clear Use a proxy server for your LAN.
Click OK.
When you use Internet Explorer for access, set Internet Explorer to ensure the normal
display of and operations on the WebUI. Choose Tools > Compatibility View, and add
the web access address to the compatibility view.
Choose Tools > Internet options > Security, choose Add the ECC800-Pro IP address
to the list of trusted sites.
Copyright © Huawei Technologies Co., Ltd.
Step 3.3 and Step 3.4. Otherwise, you will fail to access the ECC800-Pro.
5 Power-On Commissioning
Step 3.3 and
93