How Should I Add Devices Accessed Through The Ecc800 Ai/Di Port To The Ecc800 Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Path
3.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800 WebUI, and drag the device to the corresponding
position in the Smart Module View pane based on the actual device layout.
9.1.23 How Should I Add Devices Accessed Through the ECC800
AI/DI Port to the ECC800 WebUI
Prerequisites
This section uses the device connecting to the AI/DI_1 port on the ECC800 as an example.
Context
Figure 9-9 Network diagram
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Add the device.
Issue 02 (2019-02-28)
Parameter
Device address
Click Connect Test to check whether the device connects to the ECC800 properly.
− If the connection is proper, click Add Device.
− If the connection is not proper, check that the cable is properly connected between
the device and the ECC800, that the device and ECC800 are running properly, and
that the input parameters are consistent with the device parameters.
Copyright © Huawei Technologies Co., Ltd.
Setting
This section uses 1 as an example. In practice, set
this parameter to be the same as the
communications address for the device.
9 FAQ
213