Huawei ECC800 User Manual page 57

ECC800 Data Center Controller
User Manual
Item
E-label
Indicators
Table 3-41 Description of the indicators on the multi-functional sensor
Indicator
RUN
ALM
RF_Z
Issue 02 (2019-02-28)
Specifications
Supported
Color Name
Green Module
running status
indicator
Red Alarm
indicator
Green Communicati
on status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking at The multi-functional sensor
long successfully registers with
intervals the ECC800 and the software
runs properly (the indicator
blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at The multi-functional sensor
short fails to register with the
intervals ECC800 or the
communication fails (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm or
smoke alarm is generated.
Off No system alarm is
generated.
Steady on No network parameters exist,
or a network is to be created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and
super short node access is allowed (the
intervals indicator blinks at 10 Hz, on
for 0.05s and then off for
0.05s).
3 Device Description
48