Ecc800 System Network Diagram (Fusionmodule1000) - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 2-4 ECC800 system network diagram (FusionModule2000)

2.2.3 ECC800 system network diagram (FusionModule1000)

The system network diagram uses FusionModule1000 V200R003C00 as an example.
Issue 02 (2019-02-28)
 In the figure, RF_Z indicates wireless networking. RF_Z(1) devices can communicate with the
ECC800 in wireless mode. The RF_Z(2) BIM and CIM communicate with each other in wireless
mode. RF_Z(1) and RF_Z(2) devices use different protocols and are isolated from each other.
 Wireless communication is automatically established after the access actuator, skylight actuator, and
multi-functional sensor successfully connect to and communicate with the ECC800 through PoE.
Copyright © Huawei Technologies Co., Ltd.
2 Overview
5