Huawei ECC800 User Manual page 43

ECC800 Data Center Controller
User Manual
Indicator
RF_Z
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/GND).
Table 3-28 lists the LOCK/GND/GATE/GND port pin definitions.
Table 3-28 LOCK/GND/GATE/GND port pin definitions
Item
LOCK/GND
(control
magnetic
locks) pin
sequence
GATE/GND
(door status)
pin sequence
Issue 02 (2019-02-28)
Color
Green
Description
LOCK 12V_OUT
GND GND
GATE DI1
GND GND
Copyright © Huawei Technologies Co., Ltd.
Name
Wireless
communication status
indicator
3 Device Description
Status

Steady on: No
network parameters
exist, or a network is
to be created.
 Blinking at long
intervals: A network
is set up, and no node
access is allowed (the
indicator blinks at 0.5
Hz, on for 1s and
then off for 1s).
 Blinking at super
short intervals: A
network is set up, and
node access is
allowed (the indicator
blinks at 10 Hz, on
for 0.05s and then off
for 0.05s).

Blinking
intermittently at super
short intervals: The
access actuator is
searching for a
network (the
indicator blinks at
super short intervals
for 0.5s and then
turns off for 0.5s).
34