Huawei ECC800 User Manual page 89

ECC800 Data Center Controller
User Manual
 The WAN_1 port IP address cannot be set to an IP address in any of the following network
segments: 192.168.0.x, 192.168.8.x, 192.168.248.x, and 192.168.245.x.

IP addresses for the WAN_1 and WAN_2 ports should not be set in the same network
segment.
Step 2 Configure the PC IP address and the WAN_1 IP address in the same network segment.
If the port IP address is 192.168.1.10, subnet mask is 255.255.255.0, and default gateway is
192.168.1.1, set the PC IP address to 192.168.1.11, subnet mask to 255.255.255.0, and default
gateway to 192.168.1.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Issue 02 (2019-02-28)
 If the ECC800 connects to a LAN and a proxy server has been selected, perform
3.4.
 If the ECC800 connects to the Internet, and the PC in a LAN accesses the Internet over a proxy
server, do not perform
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) Under Proxy server, clear Use a proxy server for your LAN.
Click OK.
Copyright © Huawei Technologies Co., Ltd.
Step 3.3 or Step 3.4. Otherwise, you will fail to access the ECC800.
4 UI Description
Step 3.3 and Step
80