Huawei ECC800 User Manual page 40

ECC800 Data Center Controller
User Manual
Figure 3-10 Access actuator
(1) 48 V power port
(4) RS485 port COM1
(7) BLINK button
(10) AI/DI_2 dry
contact
Specifications
Table 3-26 Access actuator technical specifications
Item
Power input
PoE port
Wireless
communicatio
n
AI/DI port
DO output
DI input
RS485 serial
port expansion
Issue 02 (2019-02-28)
(2) PoE port
(5) Address DIP switch
(8) WG_2 Wiegand
interface
(11) AI/DI_1 dry
contact
Specifications

DC input: Terminal, with input voltage of 36–60 V DC
 PoE input: One PoE port that complies with IEEE802.3at.
FE communication, 10/100M communications rate
One wireless communication port that complies with IEEE802.15.4,
mutual backup with FE communication
Two AI/DI ports, can connect to the fire alarm and exit button
One 12 V DC power output that controls magnetic locks, terminal
One DI input port for connecting to the door status switch
Two RS485 ports (one route) with the default communications rate of
9600 bit/s, physical port cascading supported (reserved function)
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
(3) RS485 port COM2
(6) Status indicator
(9) WG_1 Wiegand interface
(12) LOCK/GND/GATE/GND/door
status or magnetic lock port
31