Huawei ECC800 User Manual page 30

ECC800 Data Center Controller
User Manual
Item
USB
Buttons
Table 3-15 Indicators on the ECC800e main control module
Indicator
RUN
ALM
PWR
Issue 02 (2019-02-28)
Specification

After installing the WiFi module, connect the WiFi module to
the ECC using the app on the mobile phone or tablet computer
to view the basic information about the smart module, such as
layout, resources, energy efficiency, environment, and alarms.
 Insert the SMS module. When an alarm is reported, the ECC can
send information to the user through the 3G module.
 Insert a USB flash drive to export historical data, device data,
fault information, and configuration files, and import or export
the device configuration data and historical data.
 SW: wireless network pairing button.

Default: button of restoring the default IP address.
Color Name
Green Module running
status indicator
Red Alarm indicator
Green Power indicator
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Status Description
Steady on The power supply is normal,
the program is being loaded,
or WiFi WPS is pairing.
Off The power supply is
abnormal.
Blinking The software runs properly
at long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s) or the ECC800e
registers with the NetEco
successfully.
Blinking The ECC800e does not
at short register with the NetEco (the
intervals indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Steady on The power supply for the
system is normal.
Off The power supply for the
system is abnormal.
21