How To Set And Add A Sunrise Scu-20K - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
3.
4.
After the smart cooling product is shut down, the temperature of the smart module increases
and data running is affected. Exercise caution when performing this operation.
----End

8.1.8.20 How to Set and Add a SUNRISE SCU-20K?

Prerequisites


Procedure
Step 1 Set the SUNRISE-SCU-20K monitoring parameters.
1.
2.
Step 2 Add a SUNRISE-SCU-20K.
1.
2.
Table 8-14 Adding a SUNRISE-SCU-20K
Path
Issue 05 (2019-09-16)
 The following describes how to set the NetCol5000CF-1101.
 110x in NetCol5000CF_110x is variable and subject to change with the smart cooling product
model and connection sequence. x indicates the smart cooling product connection sequence.
On the Running Parameters tab page, set the smart cooling product running
parameters.
On the Controls tab page, set the smart cooling product control parameters (such as
on/off control parameters).
One end of the straight-through cable has been connected to the RS485 port on the
SUNRISE-SCU-20K, and the other end has been connected to the COM port on the ETH
converter.
When connecting devices, you are advised to add devices one by one and ensure that the
view is consistent with the real object. If all devices have been added and powered on,
only the BLINK function of the ETH converter can be used to identify the mapping
between the SUNRISE-SCU-20K and ETH converter.
After SUNRISE-SCU-20K startup, tap Settings on the home screen and enter the
password 111111 to enter the parameter settings screen.
Choose Settings > Comm Settings, and set Monitoring baud rate to 9600, and set
Monitoring address based on site requirements.
 The default value of Monitoring address is 1 for the SUNRISE-SCU-20K.
If multiple SUNRISE-SCU-20K devices are connected to a same smart module, ensure that each

monitoring address of a SUNRISE-SCU-20K is unique.
Log in to the ECC800 WebUI as an administrator.
Add a SUNRISE-SCU-20K.
Parameter
Name
Copyright © Huawei Technologies Co., Ltd.
Setting
8 FAQ
205