Setting The Transparent Transmission Function - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Context
For detailed operations, see iManager NetEco 6000 Device Installation and Commissioning
Guide of the corresponding version.
Procedure
1.
2.
3.

6.9.1.4 Setting the Transparent Transmission Function

Context


Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > NMS Application> Transparent Transmission Channel.
Step 3 Set COM2(Port:3212) to Enable and click Submit.
Issue 05 (2019-09-16)
Choose System> Configuration Management > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
Click in the upper left area of the Data Center Planning window.
Click Access switch to the Add Device window. You can add an ECC800 device to the
specified modular in the Add Device window.
Figure 6-50 Adding an ECC800 device to the modular
Click OK, and you can view the task information, including Type, Device Name, Region, Progress,
Status, Start Time, End Time, and Information in the displayed Progress window.
Using the transparent transmission function, the NMS can directly manage southbound
components that are not monitored by the ECC800.
In this example, the COM2 port of the ECC800 is used for transparent transmission.
Mapping relationship: COM1 corresponds to port 3211, COM2 port 3212, COM3 port 3213, and COM4
port 3214.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
159