Huawei ECC800 User Manual page 135

ECC800 Data Center Controller
User Manual
6.
Step 3 Configuring a Video Recording Plan.
1.
2.
3.
4.
5.
6.
Step 4 Create a user.
When connecting to the VCN on the NetEco, you need to log in to the VCN as a non-admin
user.
1.
2.
3.
4.
----End
Issue 05 (2019-09-16)
Click Finish to finish adding a camera.
In the Quick Setup area on the VCN IVS home page, double-click Server Recording
Plan.
Select the camera on the Cameras list and click Next.
(Optional) Set recording parameters, and click Next.
Set recording plan parameters in the Time settings. Drag the timeline to select the time
segment for implementing video recording.
If you set the recording plan policy is to All, you do not need to set the recording plan time.
Click Next to complete the recording plan setting. When
the recording plan has been set successfully.
Click Finish.
Log in to the VCN IVS as user Admin.
On the VCN IVS home page, double-click Add User, create a user, and click Next. The
Assign Rights page is displayed.
When creating a user, you can select Enable account validity period and set Valid from and Valid to
to set the account validity period for the created user.
Figure 6-25 Creating a user
Set Multi-point logins to a value greater than 2.
In the Assign Device View Rights area, select the cameras to be browsed and queried by
the user. Set other parameters based on the documentation delivered with the equipment
or the documentation obtained by referring to the Preparing Documentation section,
and click Finish.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
is displayed in the status bar,
125