Ibat - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Name
Button holding
down
Default Button
Table 3-66 Default button description
Name
Default button

3.2.17.2 iBAT

The iBAT is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries and supports 12 V power.
Features



iBAT Appearance
Figure 3-43 iBAT2.0
Issue 05 (2019-09-16)
Definition
than 5s.
Press and hold the button
for more than 10s but less
than 20s.
Definition
Hold down the button
for more than 10
seconds.
Monitors the voltages, internal resistances, and pole temperatures of 12 V batteries.
Supports the hibernation function. (When it detects that the battery voltage is low, it will
enter the low-power mode.)
Communicates with the iBOX wirelessly.
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Function
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
iBATs).
Function
Reset to the default IP address
(192.168.0.10)
72