Huawei ECC800 User Manual page 18

ECC800 Data Center Controller
User Manual

Using Ladders




Issue 05 (2019-09-16)
Do not drag steel ropes and hoisting tools or bump hoisted objects against hard objects
during hoisting.
Use wooden or fiberglass ladders when you need to perform live working at heights.
When a step ladder is used, ensure that the pull ropes are secured and the ladder is held
firm.
Before using a ladder, check that it is intact and confirm its load bearing capacity. Do not
overload it.
Ensure that the ladder is securely positioned. The recommended angle for a ladder
against the floor is 75 degrees, as shown in the following figure. An angle rule can be
used to measure the angle. Ensure that the wider end of the ladder is at the bottom, or
protective measures have been taken at the bottom to prevent the ladder from sliding.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
8