Setting The Transparent Transmission Function - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Context
For detailed operations, see iManager NetEco 6000 Device Installation and Commissioning
Guide of the corresponding version.
Procedure
1.
2.
3.

7.1.4 Setting the Transparent Transmission Function

Context


Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Transparent Transmission.
Step 3 Set COM2(Port:3212) to Enable and click Submit.

Issue 07 (2020-03-16)
Choose System > Configuration Management > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
Click in the upper left area of the Data Center Planning window to switch to the
Uncreated Device Information window.
Click in the Uncreated Device Information window to switch to the Add Device
window. You can add an ECC800 device to the specified modular in the Add Device
window. For detailed operations, see
Figure 7-2 Adding an ECC800 device to the modular
 Click OK, and you can view the task information, including Type, Device Name, Region, Progress,
Status, Start Time, End Time, and Information in the displayed Progress window.
 During binding of the ECC800 for the first time, the screen will be locked indefinitely when the
progress bar reaches 30%, and displays Loading device profile. Please try it later. The actual
operation results prevail.
Using the transparent transmission function, the NMS can directly manage southbound
components that are not monitored by the ECC800.
In this example, the COM2 port of the ECC800 is used for transparent transmission.
If the port is set for the first time, you are prompted to set an authentication password.
On the Set Authentication Password tab page, set Authentication password and
Confirm authentication password and click Submit.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-2.
7 Remote Management
172