Huawei ECC800 User Manual page 38

ECC800 Data Center Controller
User Manual
Figure 3-8 Power distribution unit
(1) QF1–6 circuit
breakers
(5) AC output
terminal
(9) FE1 cascading
signal port
Table 3-20 Technical specifications of the power distribution unit
Item
Power input
Power output
FE port
POE port
BLINK button
Issue 07 (2020-03-16)
(2) Status indicator
(6) PWR_OUT
cascading power
port
(10) PWR_IN
cascading power
port
Specifications
PWR_IN power input terminal, for power cascading, input voltage
range: 45–55 V DC
PWR_OUT power output terminal, for power cascading, output
voltage range: 45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M
communications rate, for cascading between power distribution
units and between the power distribution unit and general input unit
Four POE ports, RJ45 terminal with an indicator, 10/100M
communications rate, 45–55 V DC power output
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super short
intervals for 0.5s and then off for 0.5s) for 10s.
Copyright © Huawei Technologies Co., Ltd.
(3) BLINK button
(7) FE2 (Fast
Ethernet) cascading
signal port
(11) AC output
terminal
3 Device Description
(4) AC output
terminal
(8) POE1–4 ports
29