Safety Symbols And Warnings; Cyber Security - ABB TLE Scalable Series Installation Manual

8/54

1.1 Safety symbols and warnings

Safety warnings
The text of this manual contains some warnings to avoid risk to the persons and to avoid damages to the UPS
system and the supplied critical loads.
The non-observance of the warnings reminding hazardous situations could result in human injury and equipment
damages.
Please pay attention to the meaning of the following warnings and symbols.
Throughout this manual the following symbols are defined:
Warning, if instruction is not followed injury or serious equipment damage may occur!
Caution, internal parts have dangerous voltage present.
Risk of electric shock!
PE (Earth) – GND (Ground)
Protective Grounding terminal:
A terminal which must be connected to earth ground prior to making any other connection to
the equipment.
A terminal to which or from which an alternating (sine wave) current or voltage may be applied
or supplied.
A terminal to which or from which a direct current or voltage may be applied or supplied.
This symbol indicated the word "phase".
This symbol indicates the principal ON/OFF switch in the on position.
This symbol indicates the principal ON/OFF switch in the off position.

1.2 Cyber security

UPS must be protected in a Security Restricted Area.
UPS must be installed in a location/room with mechanical lock.
Limit access to authorized personnel only and it shall stay under Authorized Personnel Operator to
manage the accesses.
TLE Scalable Series 40 to 150 UL S1 UPS Installation Guide / REV-B