System Settings; Setting The Video Format Function; Setting The Output Phase - Panasonic AV-HS6000 Series Operation Manual

System settings

For details of operation in the 3G mode or the 4K mode, refer to "Difference of function for each mode" (page 164).

Setting the video format function

One system format (input/output signal) can be selected.
@ NOTE
t Do not change the format during any of the following operations:
- When loading from a memory card or saving to a memory card
- When loading from the Storage Module AV-HS60D1 or saving to the Storage Module AV-HS60D1
- When recording videos or still images
1
Select the <SYS> button → [SYSTEM] → [Video] tab.
2
Select an item in [Video Format] in the [Video Format] column.
f Select a system format. Selectable items are as follows:
- Standard mode:
[1080/59.94i], [1080/50i], [1080/24PsF], [1080/23.98PsF], [720/59.94p], [720/50p], [480/59.94i], [576/50i], [1080/29.97PsF], [1080/25PsF]
- 3G mode
[1080/59.94p], [1080/50p]
- 4K mode
[2160/59.94p], [2160/50p]
3
Select an item in [16:9 Squeeze] in the [Video Format] column.
f This setting is enabled when SD is selected as the system format.
f When [16:9 Squeeze] is set to [On], a border width (wipe or PinP), which considers cases where SD format videos are converted to the 16:9
aspect ratio before use, is established.
[Off]
[On]
r Border width (graphical representation) when squeeze mode is supported

Setting the output phase

The phase of the output video signals can be adjusted.
1
Select the <SYS> button → [SYSTEM] → [Video] tab.
2
Select an item in [System] in the [Output Phase] column.
[1H]
[0H]
3
Select an item in [H‑Phase[H]] in the [Output Phase] column.
f Adjust the H phase. It can be adjusted to a value from [−0.50H] to [0.49H].
4
Select an item in [V‑Phase [Line]] in the [Output Phase] column.
f Adjust the V phase. It can be adjusted to a value from [−100H] to [100H].
r Phase adjustment setup
f The line synchronizer range is the draw-in range in which automatic phase adjustment is possible. The following illustration shows that the signal is
1080/59.94i.
Chapter 8 System Menu — System settings
Squeeze mode is not supported.
Squeeze mode is supported.
Squeeze (4:3)
Outputs video signal with 1H delay against the system sync signal. When the frame synchronizer function is on, the
video signal is output with delay of 1 frame + 1H.
Output video signals are output in phase for the system sync signal. The frame synchronizer function is ON for all input
signals.
16:9
– 141 –