Panasonic AV-HS6000 Series Operation Manual page 155

2
Select [ID] and select an item.
f Select [Mainframe], [MainPanel], [SubPanel1], or [SubPanel2] as the setting target.
3
Select the port where you want to assign a function from the port list in the left column.
f Select [Select] to filter the port list in the left column. Select a color from [All], [GPI Out1‑6], [GPI Out7‑12], [GPI Out13‑18], [GPI Out19‑24], [GPI
Out25-30], [GPI Out31-36], [GPI Out37-42], and [GPI Out43-48].
4
Select the function to assign from the function list in the right column.
f Select [Type] to select the type of output signal from the function list in the right line.
- [LowEdge]: Falling edge
- [HighEdge]: Rising edge
- [LowLevel]: Low level
- [HighLevel]: High level
f Select [Group Select] to switch the group of the function list in the right column.
For details, refer to "GPI output function list" (page 155).
f For tally output assignment, select [Tally Select] to set the tally group.
f For details, refer to "Tally output function list" (page 155).
5
Select [Assign].
f The function is assigned to the button selected in the step
f Select [Test Fire] to test the signal output operation of the set GPI port. The pulse of Low level is output for approximately 0.05 seconds.
r GPI output function list
Describes about when [ME1], [ME2], [DSK], [USK], or [OTHER] is selected in [Group Select].
[Group Select]
[ME1], [ME2]
[DSK]
[USK]
[OTHER]
@ NOTE
t When a plug-in software application is introduced, some functions inherent to that application may be added as functions to be assigned.
r Tally output function list
f This table describes cases when [Tally Group1], [Tally Group2], [Tally Group3], or [Tally Group4] is selected in [Group Select].
[Tally Select]
[Input1-20]
[Input21-40]
[Internal]
[MEOut]
[AUX]
Chapter 8 System Menu — Setting the external connection
2
.
Signal name
KEY1 ON to KEY4 ON
KEY1 CUT to KEY4 CUT
CUT
KEY1 Trans to KEY4 Trans
AUTO
KEY1 ON to KEY4 ON
KEY1 CUT to KEY4 CUT
KEY1 Trans to KEY4 Trans
USK1 ON - USK4 ON
No Assign
Event MEM
FTB ON
FTB Trans
Signal name
SDI IN1 to SDI IN20
SDI IN21 to SDI IN32
DVI IN1 to DVI IN2
Still 1V to Still 4V
Still 1K to Still 4K
Clip 1V to Clip 4V
Clip 1K to Clip 4K
CBGD1, CBGD2
ME1PGM, ME2PGM
ME1PVW, ME2 PVW
ME1CLN, ME2CLN
DSKPGM1, DSKPGM2
DSKPVW1, DSKPVW2
DSK1CLN to DSK4CLN
AUX1 to AUX16
Description
Key on
Cut transition of a key was executed
Cut transition was executed
Key transition in progress
Auto transition in progress
DSK on
Cut transition of the DSK was executed
DSK transition in progress
On/off of USK1 ON to USK4 ON.
No function assigned
Event set by event memory executed
FTB on
FTB transition in progress
Description
SDI input signals 1 to 20
SDI input signals 21 to 32
DVI-D input signal
Video memory (photo) 1 to 4 videos
Video memory (photo) 1 to 4 keys
Video memory (video) 1 to 4 videos
Video memory (video) 1 to 4 keys
Color background 1, 2
Program video signal
Preview video signal
Clean signal
Program video signal
DSK preview video signal
Clean signal
AUX video signal
– 155 –
[Type]
[LowLevel] or [HighLevel]
[LowEdge] or [HighEdge]
[LowLevel] or [HighLevel]
[LowLevel] or [HighLevel]
[LowEdge] or [HighEdge]
[LowLevel] or [HighLevel]
[LowLevel] or [HighLevel]
―
[LowEdge] or [HighEdge]
[LowLevel] or [HighLevel]
[Type]
[LowLevel] or [HighLevel]