Network Settings - Panasonic AV-HS6000 Series Operation Manual

[On]
[AUTO]
f For selecting the type of ancillary data for the corresponding DSKPGM output, refer to Step
6
Select an item in [DSKPGM1]/[DSKPGM2] in the [DSK ANC TYPE] column.
f Selects the type of the ancillary data to superimpose to the DSKPGM output (DSKPGM1/DSKPGM2).
f Selects the type for DSKPGM1 output in [DSKPGM1], and the type for DSKPGM2 output in [DSKPGM2].
[BKGD]
[DSK1]
[DSK2]
[DSK3]
[DSK4]
7
Select an item in [ME ANC Mode] in the [ME ANC Mode] column.
f Selects if all ME to apply the same setting or to apply individual setting for each ME as the type of the ancillary data for ME.
[Common]
[Each]
8
Select an item in [Common] in the [ME ANC Mode] column, and [ME1] and [ME2] in the [ME ANC Each Type] column.
Selects the type of the ancillary data to be superimposed to the ME1PGM output, ME2PGM output, ME1PVW output, and ME2PVW output.
[BKGD]
[KEY1]
[KEY2]
[KEY3]
[KEY4]
Setting the ancillary for the MultiView display
1
Select the <SYS> button → [SYSTEM] → [Video] tab.
2
Select an item in [MV1] to [MV4] in the [MV Ancillary] column.
f Configure the setting to superimpose the ancillary data to each MultiView display output.
[ME1‑PGM]/[ME2‑PGM]
[ME1‑PVW]/[ME2‑PVW]
[DSK‑PGM1]/[DSK‑PGM2]
[Off]
Setting the crosspoint switching
The timing at which the crosspoints are to be switched can be set.
f This switching involves the operation of the crosspoint buttons and the <CUT> button.
1
Select the <SYS> button → [SYSTEM] → [Video] tab.
2
Select an item in [Timing] in the [XPT Switch] column.
f Select the timing of switching.
[Any]
[Field1]
[Field2]

Network settings

For details on network settings, refer to "Network settings" (page 47).
Chapter 8 System Menu — System settings
f When [BKGD] is selected as the type of the ancillary data for corresponding DSKPGM output
Superimposes the ancillary data of the PGM output from ME that will become the base.
f When [DSK1] to [DSK4] is selected as the type of the ancillary data for corresponding DSKPGM output
Superimposes the ancillary data of the source selected in the key file bus for DSK1 to DSK4.
f When [BKGD] is selected as the type of the ancillary data for corresponding DSKPGM output
Superimposes the ancillary data of the PGM output from ME that will become the base.
f When [DSK1] to [DSK4] is selected as the type of the ancillary data for corresponding DSKPGM output
- During the period that the DSK1 to DSK4 are turned on
Superimposes the ancillary data of the source selected in the key file bus for DSK1 to DSK4.
- During the period that the DSK1 to DSK4 are not turned on
Does not superimpose the ancillary data.
The ancillary data for PGM output of ME to be the base.
The ancillary data for the source selected in the key file bus of DSK1.
The ancillary data for the source selected in the key file bus of DSK2.
The ancillary data for the source selected in the key file bus of DSK3.
The ancillary data for the source selected in the key file bus of DSK4.
f The same setting is applied to all ME.
Setting in the [ME ANC Mode] column → [Common] is applied.
f The individual setting is applied for each ME.
Setting in the [ME ANC Each Type] column → [ME1], [ME2] item is applied respectively.
Ancillary data of the source selected in the PGM bus or the PST bus of each ME
Ancillary data of the source selected in the KEY1 fill bus of each ME
Ancillary data of the source selected in the KEY2 fill bus of each ME
Ancillary data of the source selected in the KEY3 fill bus of each ME
Ancillary data of the source selected in the KEY4 fill bus of each ME
Superimposes the ancillary data of the source selected in the PGM bus of ME1/PGM bus of ME2.
Superimposes the ancillary data of the source selected in the PST bus of ME1/PST bus of ME2.
Superimposes the ancillary data superimposed to DSKPGM1/DSKPGM2.
Does not superimpose the ancillary data.
The crosspoints are switched in the nearest field. This is for live applications.
The crosspoints are switched in field 1. This is for editing applications.
The crosspoints are switched in field 2. This is for editing applications.
6
.
– 146 –