Snmp Tab; Iscsi System Access Page; Default Configuration Page - Bosch LTC-1311-20 Configuration Manual

108 en | Devices page
Activate the different logs for VRM Server and VRM Configurator, and specify the retention
time for log files in days.
The log files for VRM Server are stored on the computer on which VRM Server has been
started, and can be viewed with VRM Monitor.
The log files for VRM Configurator are stored locally in the following directory: C:\Documents
and Settings\<User>\My Documents\Bosch\Video Recording Manager\Log
Other settings are also available:
–
–
17.23.2

SNMP tab

Main window >
1. SNMP host address 2. SNMP host address
VRM supports the SNMP V2 (Simple Network Management Protocol) for managing and
monitoring network components, and can send SNMP messages (traps) to IP addresses. The
unit supports SNMP MIB II in the unified code. If you wish to send SNMP traps, enter the IP
addresses of one or two required target units here.
All entries in the Event Log list in VRM Monitor are sent as traps, with the exception of Debug
entries. SNMP traps are filtered and processed on the SNMP server.
17.23.3

iSCSI System Access page

Main window >
Allows you to enter a password so that the VRM system can access this iSCSI storage system
for configuration.
17.23.4

Default Configuration page

Main window >
Configuration tab
Allows you to perform a basic configuration of your iSCSI device. You create LUNs on the iSCSI
hard drive and format these LUNs.
Only displayed if the device is one of the iSCSI storage systems supported by Bosch, for
example NetApp.
Capacity (MB)
Displays information on the total capacity of the storage system.
Number of LUNs
You can change the number of LUNs.
Configuration Client | V3 | 2010.07
VRM Server – Complete memory dump file
Only activate this option if necessary, for example if the Technical Customer Service
team requests a complete summary of the main memory.
VRM Server – Telnet support
Activate this option if access with the Telnet protocol is to be supported.
Devices > Expand
Devices > Expand
Devices > Expand
Configuration Manual
Bosch Video Management System
>
> Expand >
> Expand > Click
Bosch Sicherheitssysteme GmbH
> Default