Monitor Groups Page; Settings Page; Advanced Configuration Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
17.14

Monitor Groups page

Main window >
Allows you to add and configure analog monitor groups. You assign an analog monitor group to
a Bosch Video Management System workstation in
17.14.1

Settings page

Main window >
Allows you to perform the following tasks:
–
–
–
Name:
Type the name of the analog monitor group.
Columns:
Enter the number of columns for the analog monitor group. The result is displayed.
Rows:
Enter the number of rows for the analog monitor group. The result is displayed.
Unassigned Decoder Channels
Drag a decoder to an available analog monitor.
Monitor image
The white number, if present, displays the logical number of the initial camera. The black
number displays the logical number of the decoder.
Right-click an analog monitor image to toggle between single view and quad view. On the
Advanced Configuration page, the Quad View column displays the corresponding setting.
To un-assign a decoder, right-click the analog monitor image and click Clear Monitor.
17.14.2

Advanced Configuration page

Main window >
Allows you to perform the following tasks:
–
–
–
NOTICE!
We do not recommend configuring quad view for H.264 cameras.
Note the following hints on switching the decoder between quad view and single view in the
Operator Client:
–
Bosch Sicherheitssysteme GmbH
Devices > Expand
Devices > Expand
Configure an analog monitor group
Assign decoders to an analog monitor group
Enable quad view for decoders that support quad view
Devices > Expand
Configure the logical number of a decoder or decoder channel.
Enable quad view for decoders that support quad view
Configure the OSD.
The user can manually switch the decoder back to single view when it is configured as
quad view.
Configuration Manual
>
.
> > Settings tab
> > Advanced Configuration tab
Configuration Client | V3 | 2010.07
Devices page | en 97