Inputs Page; Workstation Page; Settings Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
17.11.4

Inputs page

Main window >
Allows you to add inputs to a Bosch Allegiant device.
Add Input
Click to add a new row in the table for specifying a new input.
Delete Input
Click to remove a row from the table.
Input No.
Type the required number of the input. If you enter an already used number, a message is
displayed.
Input Name
Type the required name of the input.
17.12

Workstation page

Main window >
Allows you to configure the following settings for a workstation:
–
–
–
–
–
A workstation must have the Operator Client software installed.
To add a CCTV keyboard that is connected to a decoder, expand
To assign an analog monitor group, configure such a group in
17.12.1

Settings page

Main window >
Allows you to configure a script that is executed when the Operator Client on the workstation
is started.
Allows you to configure which stream of an IP device is used for live display.
Allows you to enable Forensic Search for this workstation.
And you can configure the keyboard that is connected to this workstation.
Network address:
Type the DNS name or the IP address of your workstation.
Startup script:
Select the desired script that you want to be started when the workstation's Operator Client
is started. You create or import such a script on the Events page.
Bosch Sicherheitssysteme GmbH
Devices > Expand
Devices > Expand
Add a digital keyboard connected to a Bosch Video Management System workstation.
Assign a Command Script that is executed on startup of the workstation.
Select the data stream for live display.
Enable Forensic Search.
Assign analog monitor groups to a workstation.
Devices > Expand
Configuration Manual
> > Inputs tab
>
, click
>
> > Settings tab
Configuration Client | V3 | 2010.07
Devices page | en 95
.
> .