Bosch Video Management System
11.10
Configuring an alarm
Main window >
Before configuring an alarm you must configure the trigger in Events.
To configure an alarm:
1.
2.
3.
4.
5.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
11.11
Configuring settings for all alarms
Main window >
You can set the following global alarm settings:
–
–
–
–
–
–
–
To configure all alarms:
1.
2.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
Bosch Sicherheitssysteme GmbH
Alarms
In the tree, select an alarm, for example System Devices > Authentication > Operator
Authentication Rejected.
The corresponding Alarm Configuration Table is displayed.
In the Priority column, click ... in a cell to type the alarm priority for the selected alarm
(100 is low priority, 1 is high priority).
In the Title column, click ... in a cell to type the title of the alarm to be displayed in Bosch
Video Management System, for example in the Alarm List.
In the Color column, click ... in a cell to display a dialog box for selecting a color for the
alarm to be displayed in the Operator Client, for example in the Alarm List.
In the 1-5 columns, click ... in a cell to display the Select Image Pane Content dialog box.
Make the required settings.
In the Audio File column, click ... in a cell to display a dialog box for selecting an audio
file that is played in case of an alarm.
In the Alarm Options column, click ... in a cell to display the Alarm Options dialog box.
This dialog box allows you to configure the following settings for alarms:
–
Cameras that start recording in case of an alarm
–
Enabling protection for these alarm recordings (only for NVR recording)
–
Triggering PTZ commands in case of alarm
–
Notifications that are sent in case of an alarm
–
Workflow that has to be processed in case of an alarm
–
Assigning cameras that are displayed in analog monitor groups in case of an alarm.
Alarms
Mode for alarm handling
Number of Image panes per alarm
Auto-clear time
Instant playback rewind time
Manual alarm recording time
Repeat time for alarm sound
Configure the behavior of all analog monitor groups
Click
.
The Global Alarm Settings dialog box is displayed.
Make the appropriate settings.
Configuration Manual
Configuring events and alarms | en
Configuration Client | V3 | 2010.07
63