Displaying Information On An Nvr; Changing The Network Address Of An Nvr / Failover Nvr / Redundant Nvr - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
2.
3.
4.
7.8

Displaying information on an NVR

Main window >
You can display the following information on an NVR:
–
–
To display information on an NVR:

7.9 Changing the network address of an NVR / Failover NVR /
Redundant NVR
Main window >
or
Main window >
or
Main window >
To change the IP address of an NVR / Failover NVR / Redundant NVR:
1.
2.
Bosch Sicherheitssysteme GmbH
Click the Assigned NVR tab.
The table displays all Primary NVRs.
In the first column, click to check the desired NVR.
Each checked primary NVR has the selected Redundant NVR assigned.
In the Backup column, make the desired setting.
When cleared, the Camera Storage tab becomes active.
Devices> Expand
Network related information
Disk usage statistics and the available disk space on the NVR.
Click the Disk Storage tab to view information on the selected NVR.
Devices> Expand
Devices > Expand
Devices > Expand
Right-click / /
The Network address dialog box is displayed.
Change the entry in the field according to your requirements.
Configuration Manual
> Expand
> Expand
> Expand
> Expand
and click Change network address.
Configuring NVRs | en
>
Configuration Client | V3 | 2010.07
39