Ptz Settings Dialog Box - Bosch LTC-1311-20 Configuration Manual

138 en | Cameras and Recording page
CABAC: Select to activate high efficient compression. Uses a large amount of processing
power.
21.5

PTZ Settings dialog box

Main window >
Allows you to configure a PTZ camera.
Note:
First configure the port settings of your PTZ camera before you can configure the PTZ camera
settings. Otherwise the PTZ control is not working in this dialog box.
You set predefined positions and auxiliary commands.
Click to move the camera to the predefined position or to execute the command.
Click to save the predefined position or command.
Click to rename the predefined position or command.
Click to remove the predefined position or command.
Predefined Positions tab
Click to display the table with the predefined positions.
Nr
Displays the number of the predefined position.
Name
Click a cell to edit the name of the predefined position.
Aux Commands tab
Click to display the table with the auxiliary commands.
Nr
Displays the number of the auxiliary command.
Name
Click a cell to edit the name of the command.
Code
Click a cell to edit the command´s code.
Configuration Client | V3 | 2010.07
Cameras and Recording >
Configuration Manual
Bosch Video Management System
> Select a PTZ camera >
Bosch Sicherheitssysteme GmbH