E-Mail/Smtp Server Dialog Box; Add Sms Device Dialog Box; Smtp Server Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
17.15.1

E-mail/SMTP Server dialog box

Main window >
command
Allows you to add an e-mail server to your Bosch Video Management System.
Name:
Type the display name of the e-mail server.
17.15.2

Add SMS Device dialog box

Main window >
Allows you to add an SMS device to your system.
Name:
Type the name of the e-mail server that is used for being displayed.
GSM modem
Click to add a GSM modem.
SMSC dial up
Click to add a Hayes compatible modem which can connect to an SMSC provider.
17.15.3

SMTP Server page

Main window >
Allows you to configure the e-mail settings of your system. On the Events page, you can assign
an event to an e-mail. When this event occurs, the systems sends an e-mail. You cannot receive
e-mails in Bosch Video Management System.
SMTP Server Name:
Type the name of the e-mail server. You get the information about the required entry from
your provider. Usually this is the IP address or DNS name of your e-mail server.
Port:
Type the required network port number for outgoing mails. You get the information about the
required entry from your provider.
Connection time-out [s]:
Type the number of seconds of inactivity until the connection is disconnected.
Authentification:
Select a check box for the required authentication method. You get the information about the
required entry from your provider.
Username:
Type the user name for authenticating at the e-mail server. You get the information about the
required entry from your provider.
Password:
Type the password for authenticating at the e-mail server. You get the information about the
required entry from your provider.
Bosch Sicherheitssysteme GmbH
Devices > Expand > Right-click
Devices > Expand > Right-click
Devices > Expand > Expand
Configuration Manual
Devices page | en
> Add E-mail/SMTP Device
> Add SMS Device command
>
Configuration Client | V3 | 2010.07
99