Assigning A Map To A Folder; Managing Devices On A Map - Bosch LTC-1311-20 Configuration Manual

46 en | Configuring the structure
After you have added at least two maps, you can add a link on one map to the other so that
the user can click from one map to a linked one.
To add a link:
1.
2.
3.
4.
5.
8.11

Assigning a map to a folder

Main window >
Before you can assign maps, you must have map resource files imported.
If required, see Section 8.4 Managing resource files, page 42 for details.
To assign a map resource file:
1.
2.
3.
8.12

Managing devices on a map

Main window >
Before you can manage devices on a map you must add a map or assign a map to a folder and
add devices to this folder.
NOTICE!
After each of the following tasks:
Click
To place items on a map:
1.
2.
3.
To remove an item in the Logical Tree only from the map:
1.
2.
Configuration Client | V3 | 2010.07
Click a map folder in the Logical Tree.
Right-click the map and click Create Link.
The Select Map for Link dialog box is displayed.
In the dialog box, click a map
Click Select.
Drag the item to the appropriate place on the map.
Maps and Structure
Right-click a folder and click Assign Map.
The Select Resource dialog box is displayed.
Select a map resource file in the list.
Click OK.
The selected folder is displayed as
The map is displayed in the map window.
All items within this folder are displayed in the upper left corner of the map.
Maps and Structure
to save the settings.
Select a map folder.
Drag devices from the Device Tree to the map folder.
The devices of a map folder are located on the left upper corner of the map.
Drag the items to the appropriate places on the map.
Right-click the item on the map and click Invisible.
The item is removed from the map.
The item remains in the Logical Tree.
To make it visible again, right-click the device in the Logical Tree and click Visible In Map.
Configuration Manual
.
.
Bosch Video Management System
Bosch Sicherheitssysteme GmbH