Cctv Keyboards Page - Bosch LTC-1311-20 Configuration Manual

104 en | Devices page
Allows you to trace SNMP trap OIDs. You can receive traps from all devices in your network or
only from selected ones. You can filter the traps to be received and you can add OIDs and
values of selected traps to the SNMP Trap Filter Rules: table.
Start/Pause
Click to start or stop a tracing process.
Only Traps From Sender
Enter the IP address or DNS name of a device. Only traps from this device are traced.
Only Traps Containing
Enter a string a trap can contain. You can use * and ? as wildcards. Strings in {} are treated as
regular expressions. Only traps containing such a string are traced.
Received Traps
Displays the traps that are received by a tracing process.
Click to remove all entries in the Received Traps field.
Trap Details
Displays the trap details. You can copy the OID and the Value entry to the SNMP Trap Filter
Rules: table.
17.19

CCTV Keyboards page

Main window >
Allows you to add a CCTV keyboard connected to a Bosch Video Management System
workstation or to a decoder.
Add Keyboard
Click to add a row to the table for configuring a keyboard.
Delete Keyboard
Click to remove the selected row.
Keyboard Type
Displays the type of the keyboard that is connected to your workstation.
Connection
In a cell, select the required connection of the keyboard to a workstation or a decoder. If you
select a workstation, the keyboard is also added to the
Port
In a cell, select the desired COM port.
Baudrate
In a cell, select the maximum rate, in bits per second (bps), that you want data to be
transmitted through this port. Usually, this is set to the maximum rate supported by the
computer or device you are communicating with.
Data bits
Displays the number of data bits you want to use for each character that is transmitted and
received.
Configuration Client | V3 | 2010.07
Devices > Expand >
Configuration Manual
Bosch Video Management System
> page.
Bosch Sicherheitssysteme GmbH